High quality speaker cables
TOP
High quality speaker cables spezial
All speaker cables we offer "sound" extremely neutral, with fine resolution, spatial, dynamic and controlled. They are now valued by many users as an absolutely high-end product. The RALIC speaker cables are quality products made in Germany. They were developed in the RALIC company and manufactured exclusively for us by a well-known German brand manufacturer!
Due to the optimized structure and the shielding, RALIC loudspeaker cables do not "slow down" the capabilities of your amplifier and loudspeakers. Due to the optimal adjustment of all electrical, electromagnetic and mechanical parameters, the interaction between amplifier and loudspeaker is practically not impaired by the RALIC loudspeaker cables.
As a rule, loudspeaker cables do not "sound", rather they change the interplay between amplifier and loudspeaker, depending on the quality and structure. This cable-dependent change in the (amplifier) output signal is often referred to as "cable sound"!
RALIC X4G
The speaker cable X4G is the once again improved version of the proven X1-HE! This LS cable is the further development of our RALIC X1 HE and its already excellent properties could be improved again.
The trade journal Stereo reported in December 2005 under the heading:
Insider tip from Ratingen
... The top speaker cable X4G, which is very tightly stranded for the purpose of low inductance, comes with a very high quality fabricated in a decorative textile tube. It develops controlled thrust and rich timbre with pronounced spatiality and excellent timbres across the entire transmission spectrum ...
A speaker cable with even better sound properties and a completely new design, the RALIC X4G. Some changes in the structure and the materials used have increased the excellent quality of the RALIC X1 HE even more.
The design is of the highest quality and the structure is consistent. The measured values also prove the absolute quality of our cables here. The "sound" is breathtakingly fine, detached, spatial and precise! Pitch black but very controlled basses give you goose bumps that enchant the voices.
In the References section you can read what other users write about our products.
The standard length is 2 x 3 m. Other lengths can be selected, but cannot be exchanged or returned as a custom-made product!
Special lengths on request!
Here are some technical data on the LS cables offered
The conductors are made of high-purity (over 99.4%) copper, which is combined from many fine individual cores to form very flexible strands. These have a cross section of 1.5 mm² each. This results in a total cross section of 3 mm² per conductor.
The shielding has a degree of coverage of approx. 90%. This largely prevents radiation of any kind according to the principle of a Faraday cage. Electromagnetic interference fields do not have a chance to use the cables as antennas and so do not get into the amplifier or the loudspeakers. It also has a positive effect on the electrical field within the cable.
Further data, measured by WBE. AUDIOELEKTRONIK (www.wbe-audio.de), all for 1 m length:
DC resistance: 5.5 mOhm (0.0055 Ohm)
(measured between the ends of the twisted red "double conductor")
Inductance:
1 kHz 0.93 uH
10 kHz 0.90 uH
100 kHz 0.84 uH
(all measured between the ends of the twisted red "double conductor")
Capacity:
100Hz 205 pF, D factor 0.063
1 kHz 185 pF, D factor 0.076
10 kHz 163 pF, D factor 0.083
100 kHz 144 pF
(all measured between twisted red "double conductor" and twisted black "double conductor")
Capacity:
100Hz 324 pF
1 kHz 293 pF
10 kHz 259 pF
100 kHz 227 pF
(all measured between twisted red "double conductor" and outer shield)
With these values, it quickly becomes clear why this speaker cable transmits the sound of your chain so unadulterated!
The standard length is 2 x 3 m. Other lengths can be selected, but cannot be exchanged or returned as a custom-made product!
Special lengths on request!
Due to the optimized structure and the shielding, RALIC loudspeaker cables do not "slow down" the capabilities of your amplifier and loudspeakers. Due to the optimal adjustment of all electrical, electromagnetic and mechanical parameters, the interaction between amplifier and loudspeaker is practically not impaired by the RALIC loudspeaker cables.
As a rule, loudspeaker cables do not "sound", rather they change the interplay between amplifier and loudspeaker, depending on the quality and structure. This cable-dependent change in the (amplifier) output signal is often referred to as "cable sound"!
RALIC X4G
The speaker cable X4G is the once again improved version of the proven X1-HE! This LS cable is the further development of our RALIC X1 HE and its already excellent properties could be improved again.
The trade journal Stereo reported in December 2005 under the heading:
Insider tip from Ratingen
... The top speaker cable X4G, which is very tightly stranded for the purpose of low inductance, comes with a very high quality fabricated in a decorative textile tube. It develops controlled thrust and rich timbre with pronounced spatiality and excellent timbres across the entire transmission spectrum ...
A speaker cable with even better sound properties and a completely new design, the RALIC X4G. Some changes in the structure and the materials used have increased the excellent quality of the RALIC X1 HE even more.
The design is of the highest quality and the structure is consistent. The measured values also prove the absolute quality of our cables here. The "sound" is breathtakingly fine, detached, spatial and precise! Pitch black but very controlled basses give you goose bumps that enchant the voices.
In the References section you can read what other users write about our products.
The standard length is 2 x 3 m. Other lengths can be selected, but cannot be exchanged or returned as a custom-made product!
Special lengths on request!
Here are some technical data on the LS cables offered
The conductors are made of high-purity (over 99.4%) copper, which is combined from many fine individual cores to form very flexible strands. These have a cross section of 1.5 mm² each. This results in a total cross section of 3 mm² per conductor.
The shielding has a degree of coverage of approx. 90%. This largely prevents radiation of any kind according to the principle of a Faraday cage. Electromagnetic interference fields do not have a chance to use the cables as antennas and so do not get into the amplifier or the loudspeakers. It also has a positive effect on the electrical field within the cable.
Further data, measured by WBE. AUDIOELEKTRONIK (www.wbe-audio.de), all for 1 m length:
DC resistance: 5.5 mOhm (0.0055 Ohm)
(measured between the ends of the twisted red "double conductor")
Inductance:
1 kHz 0.93 uH
10 kHz 0.90 uH
100 kHz 0.84 uH
(all measured between the ends of the twisted red "double conductor")
Capacity:
100Hz 205 pF, D factor 0.063
1 kHz 185 pF, D factor 0.076
10 kHz 163 pF, D factor 0.083
100 kHz 144 pF
(all measured between twisted red "double conductor" and twisted black "double conductor")
Capacity:
100Hz 324 pF
1 kHz 293 pF
10 kHz 259 pF
100 kHz 227 pF
(all measured between twisted red "double conductor" and outer shield)
With these values, it quickly becomes clear why this speaker cable transmits the sound of your chain so unadulterated!
The standard length is 2 x 3 m. Other lengths can be selected, but cannot be exchanged or returned as a custom-made product!
Special lengths on request!
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login
For more information, please visit the home page for this product.